Currently @wolfmoon1776 on WordPress.com sites and theqtree.com
Reinstated as @WOLFM00N on Twitter, thanks to @elonmusk
Also @WOLFM00N on Gab (YAY, GAB!), Truth Social, Gettr, Parler, Keybase, etc.
Still @wolf_moon on Disqus.
View all posts by Wolf Moon
Yes the Utree is still using the old WordPress software, like the old CTH did. All the Utree commenting/notification functions work the same under WP. Utree is intended for fighting, YIKES! OR a backup site for comms if Qtree is down.
Wolf moved Qtree blog to a new software so WordPress couldn’t take down the blog like they did to CTH. WP accused SD of violating rules and gave him a couple days warning to vacate. Wolfie fixed it so they couldn’t de-platform us. The new site has some of the comment bar features, but not all.
Knew Wolfie had to change the software, but now I’m beginning to understand why I can’t comment on q-tree in the replies. Hope our Wolfie sees this exchange. Hugs back, Butterfly. Thank you for giving me more of an explanation. Think this little experiment helped clarify what’s going on.
scott…I’m glad to know it was not me just being a dum-dum.
btw, I’ll take this opportunity to let you know how much I value your posts. Really look forward to them.
The ‘like’ button doesn’t work for me here at U-tree anymore. It didn’t originally and for a long time, and then for a short time it did work, and now it doesn’t again.
This is not particularly being a problem, but I have been unable to post at qtree since about 4 am blog time.
When I have typed a comment, and hit “post”, there is a little four-bar animation that appears. If it animates four times, my comment “takes” and shows up in the thread. It has only been able to animate one or two times since my last comment at 03:51.
I have previously experienced temporary differences when the site got busy.
I figure it’s probably reindexing and suckin’ up the cycles — but I’m keeping you posted in case it is meaningful.
I believe that I can read comments on qtree for any response.
I’m probably sackin’ it shortly so no hurries on anything from me.
I noticed that the place I kept trying to respond from was still at 40 comments, so I went back to the main page and found Carl’s post had 55. So I tried going there to post a reply comment….same symptom.
OK, the green orb/orange orb thing isn’t working for me. Carl’s post says it has 73 comments and my orb still says it has 70. I’m going to see if I can burn things back to the wall and rebuild.
While I was pruning, I noticed that I had 11 cookies from qtree — grrrr — but also that I had two distinct sets of comment_author and comment_author_email cookies. is that goofing things? Should I merely delete the “wrong ones”, or delete both and get a new one?
And, yeah, when I reloaded the page after deleting all the other 7 cookies, and all the qtree/utree tabs, and rebooting the entire system (cleans out the snot), I still can’t comment.
I get the green orb, but it never updates. When new comments come in, I don’t get the orange orb of newness and the total in green stays the same. I can’t see who did likes or do likes myself. When I try to do comments, it does an incomplete update and doesn’t post the comment. When I reload the page, I get a new orb with a the current total comments.
Incidentally, I hope we haven’t lost Ozzy less than 24 hours after being welcomed back to the fold….
And I’m currently awake 3 hours after I should have been.
I am sorry you are having trouble.
I seldom wake up at night but last night I could not sleep and looked into the Qtree and read all the commotion about people not getting in while I had no problems. I read Wold tweaked something on the forum.
I hope your problems get fixed and also others are able to get on the forum. Do not give up 🙂
I got this message today and can’t log in at all. I got it for both of today’s articles. It is not posting the comment I made without logging in, either (and I don’t know if this one will post).
Not Found
The requested URL /wp-login.php?redirect_to=https%3A%2F%2Fwww.theqtree.com%2F2021%2F07%2F15%2Fshould-we-be-skeptical-of-industry-and-media-denials-of-use-of-graphene-family-nanomaterials-in-vaccines%2F was not found on this server.
When I tried to post the above, I got this message. I was able to type in my password, and the comment posted.
You are being asked to login because [MY EMAIL ADDRESS] is used by an account you are not logged into now.
By logging in you’ll post the following comment to Open Thread 02.22.21+:
I got this message today and can’t log in at all. I got it for both of today’s articles. It is not posting the comment I made without logging in, either (and I don’t know if this one will post).
Not Found
The requested URL /wp-login.php?redirect_to=https%3A%2F%2Fwww.theqtree.com%2F2021%2F07%2F15%2Fshould-we-be-skeptical-of-industry-and-media-denials-of-use-of-graphene-family-nanomaterials-in-vaccines%2F was not found on this server.
WordPress.com / Gravatar.com credentials can be used.
I am seeing a lot of OLD SESSIONS hanging on for people. As in HUNDREDS for some people. I would like to kill them off, and if you will let me, I’m going to try killing off all your old sessions and seeing if that helps. When you are ready for me to try, tell me, and I’ll do it right then and remain on standby to get you back in.
I’m just now seeing this. I don’t know what “killing off all my old sessions means,” but I’m okay with you doing what you need to do. I’m assuming I would not be able to post and would need to come back here to be let in? Anyway, I’m fine with you using your judgment.
Hi @Wolf Moon,
I couldn’t post this in the QTree today.
LEAKED DOCUMENT – ‘AUTHORIZATION TO ADMINISTER A POISON (COVID-19) VACCINE’ – THEY KNOW IT’S MURDER
Public Health Act 2016 (WA) – Instrument of Authorisation – Authorisation to Supply or Administer a Poison [SARS-COV-2 (COVID-19) VACCINE – Australian Defence Force] (No.2) 2021
1. Did you do anything that messed with the ports? As in, https is 443.
2. Having two sets of commenter cookies did seem weird. Do most people only have one? If I delete them both, will I have to be re-approved? Or are there any other unsavory consequences?
3. I can build a new computer from scratch to try to get on….but that’s an investment of time. Should I try that?
4. I just loaded a browser never before on this system, and managed to post a comment. Being brand new, it had no cookies…..should I kill the cookies in my main browser?
Excellent! Now – this may not be a stable solution. IF you get locked out again, same thing – let me know on UTree, or via Marica’s, etc. UTree probably fastest.
Hi Wolf. I am camping this week and have very little connectivity. I don’t think I am having any issues, but on my stupid phone it is hard to tell. Posting here just in case.
For completeness, I logged you out of all Q Tree sessions and sent you a password link. See if you can find it in your Mmail. It may be in spam or junk or “social” or something. I did it just now. Try to reset your PW yourself.
Wolf, I checked junk in my email program on my tablet…found nothing. And for some reason, my inbox and spam folder are not visible when I log onto my internet service provider, so I will check everything out in the morning when my office is open!!!!
Hey Wolf, the login process doesn’t seem to be working for me a Q-Tree. The login right above the post comment box, the login under the meta category in the right column, & attempting to login on an edit post for the Q-Tree that I have open in another tab. This is the first time this problem happened to me since you’ve made the access changes…fyi
So I just liked your about page for the Q-Tree, by signing into WP in the popup, but still couldn’t login.
Also, I tried to do just a comment on the 7/14 open thread, where I’m still reading, signing in w/ name, email, & website & the comment wouldn’t post either.
Sorry for the hassles & thanks for ALL of your help & tweaking the Q-niverse!
Hi, Wolf. I’m having the same issue as yesterday. When I click “Login” on the QTree, it takes me to a page that says this:
The requested URL /wp-login.php?redirect_to=https%3A%2F%2Fwww.theqtree.com%2F2021%2F07%2F16%2Fdear-kag-fraud-vitiates-everything%2F was not found on this server.
I tell you what – these look like TEXTUALLY bad links.
I suspect that when you get this, if you go to the top address field and just type in the base URL of the site – https://theqtree.com – you will get in.
FWIW, today 7/21 in the morning EDT the site is heard to reach. “This site cannot be reached.” keeps coming up repeatedly. When in, likes and replies are failing or nor registering. This is unusual in my personal experience with the site.
7/21 EDT in the morning, site is hard to enter. “This site cannot be reached” comes up repeatedly. When in, likes do not register and replies fail several times before they work (time consuming). This is unusual in my personal experience on the site. FWIW
For a while I was finally able to use the ‘like’ button here, but no more. I can still ‘like’ the article itself though. And I’m back to having to enter my log in for every post.
I just tried to post a couple minutes ago, and the post wouldn’t go through. When I tried to refresh the screen, it went to an “unable to connect” error page, and when I try to bring up the Qtree website from my bookmark bar I get the same error page message.
Vox Day a couple days ago and now QTree. Last Refugew is still up, but probably not for long. And Mike just sais the symposium is under attack again. The government is going all out.
Test
LikeLiked by 2 people
For Emergency Use Only…..😁😁😁
LikeLiked by 2 people
Wow. I can type in the reply Here, but not on q-tree. Interesting. I know Wolfie is familiar with my situation. Hi, Butterfly.
LikeLiked by 2 people
Hi Zoe!!
Yes the Utree is still using the old WordPress software, like the old CTH did. All the Utree commenting/notification functions work the same under WP. Utree is intended for fighting, YIKES! OR a backup site for comms if Qtree is down.
Wolf moved Qtree blog to a new software so WordPress couldn’t take down the blog like they did to CTH. WP accused SD of violating rules and gave him a couple days warning to vacate. Wolfie fixed it so they couldn’t de-platform us. The new site has some of the comment bar features, but not all.
BE WELL, HUGS!! 🤗🤗🤗
LikeLiked by 2 people
Knew Wolfie had to change the software, but now I’m beginning to understand why I can’t comment on q-tree in the replies. Hope our Wolfie sees this exchange. Hugs back, Butterfly. Thank you for giving me more of an explanation. Think this little experiment helped clarify what’s going on.
LikeLiked by 2 people
Give it a try and see if you can get in now!
LikeLike
I can still do it here. Fun.
LikeLiked by 1 person
Can’t “like”
LikeLiked by 2 people
Never mind!
It works now.
I do indeed LIKE the extra security.
LikeLiked by 1 person
Try one more comment and let’s see if you’re out of moderation on THIS site.
LikeLike
I just let this post out of moderation!
LikeLike
I can’t “like”, either, Yuki. I like you, though.ho
LikeLiked by 2 people
Wolfie…????8/2/2021 12:07AM…West Coast time…theqtree down???
LikeLiked by 1 person
It’s down for me too 👍
LikeLiked by 1 person
scott…I’m glad to know it was not me just being a dum-dum.
btw, I’ll take this opportunity to let you know how much I value your posts. Really look forward to them.
LikeLiked by 1 person
Too much going on for me to explain now – site will be up and down and we are fighting for control. The globonazis are in a panic.
LikeLike
wolfie, globonazis in a panic: goodstuff.
wolfie under attack: not good.
Bless you for all you do in this infernal fight!
LikeLiked by 1 person
👍😎
LikeLiked by 1 person
Thank you for the encouragement Piper, and for your kind words 👍
We are certainly all in this together… whatever this is that we’re in, we’re in it… 😁
LikeLike
scott, yep.
LikeLiked by 1 person
👍
The ‘like’ button doesn’t work for me here at U-tree anymore. It didn’t originally and for a long time, and then for a short time it did work, and now it doesn’t again.
LikeLike
Now the site seems to be working fine again. 👍
LikeLiked by 2 people
This is not particularly being a problem, but I have been unable to post at qtree since about 4 am blog time.
When I have typed a comment, and hit “post”, there is a little four-bar animation that appears. If it animates four times, my comment “takes” and shows up in the thread. It has only been able to animate one or two times since my last comment at 03:51.
I have previously experienced temporary differences when the site got busy.
I figure it’s probably reindexing and suckin’ up the cycles — but I’m keeping you posted in case it is meaningful.
I believe that I can read comments on qtree for any response.
I’m probably sackin’ it shortly so no hurries on anything from me.
LikeLiked by 3 people
I noticed that the place I kept trying to respond from was still at 40 comments, so I went back to the main page and found Carl’s post had 55. So I tried going there to post a reply comment….same symptom.
LikeLiked by 1 person
Delete and/or refresh cookie?
LikeLiked by 1 person
OK, the green orb/orange orb thing isn’t working for me. Carl’s post says it has 73 comments and my orb still says it has 70. I’m going to see if I can burn things back to the wall and rebuild.
LikeLiked by 1 person
While I was pruning, I noticed that I had 11 cookies from qtree — grrrr — but also that I had two distinct sets of comment_author and comment_author_email cookies. is that goofing things? Should I merely delete the “wrong ones”, or delete both and get a new one?
And, yeah, when I reloaded the page after deleting all the other 7 cookies, and all the qtree/utree tabs, and rebooting the entire system (cleans out the snot), I still can’t comment.
LikeLiked by 2 people
We’ll keep looking at things – hopefully it will all work out.
One thing we won’t do is go backwards. When I divulge what we found under the seats in the plane, people will be AMAZED.
LikeLiked by 1 person
Or who WHO… 🙂
It’s REAL slow right now (21st July) the same as Coothie described above. Thoughts of Slim Pickens “takin’ a ride” come to mind…
LikeLiked by 1 person
Possibly the final update for tonight….
I get the green orb, but it never updates. When new comments come in, I don’t get the orange orb of newness and the total in green stays the same. I can’t see who did likes or do likes myself. When I try to do comments, it does an incomplete update and doesn’t post the comment. When I reload the page, I get a new orb with a the current total comments.
Incidentally, I hope we haven’t lost Ozzy less than 24 hours after being welcomed back to the fold….
And I’m currently awake 3 hours after I should have been.
LikeLiked by 2 people
I am sorry you are having trouble.
I seldom wake up at night but last night I could not sleep and looked into the Qtree and read all the commotion about people not getting in while I had no problems. I read Wold tweaked something on the forum.
I hope your problems get fixed and also others are able to get on the forum. Do not give up 🙂
LikeLiked by 1 person
Ozzy is in and working fine, it seems! GMIT and eilert, too. I’m waiting for reports from them on what they did.
LikeLiked by 1 person
Hope your problems get fixed because I do enjoy reading your posts. I am sure others do too 🙂
LikeLiked by 1 person
It will get fixed. One thing I cannot do is back off on the changes. What we found will horrify the whole clan.
LikeLiked by 1 person
I got this message today and can’t log in at all. I got it for both of today’s articles. It is not posting the comment I made without logging in, either (and I don’t know if this one will post).
Not Found
The requested URL /wp-login.php?redirect_to=https%3A%2F%2Fwww.theqtree.com%2F2021%2F07%2F15%2Fshould-we-be-skeptical-of-industry-and-media-denials-of-use-of-graphene-family-nanomaterials-in-vaccines%2F was not found on this server.
LikeLiked by 1 person
When I tried to post the above, I got this message. I was able to type in my password, and the comment posted.
You are being asked to login because [MY EMAIL ADDRESS] is used by an account you are not logged into now.
By logging in you’ll post the following comment to Open Thread 02.22.21+:
I got this message today and can’t log in at all. I got it for both of today’s articles. It is not posting the comment I made without logging in, either (and I don’t know if this one will post).
Not Found
The requested URL /wp-login.php?redirect_to=https%3A%2F%2Fwww.theqtree.com%2F2021%2F07%2F15%2Fshould-we-be-skeptical-of-industry-and-media-denials-of-use-of-graphene-family-nanomaterials-in-vaccines%2F was not found on this server.
WordPress.com / Gravatar.com credentials can be used.
LikeLike
Update: I was just able to log in as usual.
LikeLiked by 1 person
OK – we’re going to have to keep watching this.
I am seeing a lot of OLD SESSIONS hanging on for people. As in HUNDREDS for some people. I would like to kill them off, and if you will let me, I’m going to try killing off all your old sessions and seeing if that helps. When you are ready for me to try, tell me, and I’ll do it right then and remain on standby to get you back in.
LikeLike
I’m just now seeing this. I don’t know what “killing off all my old sessions means,” but I’m okay with you doing what you need to do. I’m assuming I would not be able to post and would need to come back here to be let in? Anyway, I’m fine with you using your judgment.
LikeLiked by 1 person
Just to clarify, my last successful post was at 3:51. About 10 minutes later, it began to dawn on me that things were wonky.
LikeLiked by 1 person
Try again – the fix just worked for K1tt7-fzn.
LikeLike
Looks like I’m in. See you over there!
LikeLiked by 1 person
Excellent!
LikeLike
CTHulhu, fun to be able to reply to your comment.
LikeLike
Oh, I forgot, I Can like on this page. There is a link right above my like button. I forgot that. Not on the daily, though.
LikeLiked by 1 person
Yeah, this is a different commenting system here, that’s why! The new one on the main site causes trouble for some reason.
LikeLiked by 1 person
Hi @Wolf Moon,
I couldn’t post this in the QTree today.
LEAKED DOCUMENT – ‘AUTHORIZATION TO ADMINISTER A POISON (COVID-19) VACCINE’ – THEY KNOW IT’S MURDER
Public Health Act 2016 (WA) – Instrument of Authorisation – Authorisation to Supply or Administer a Poison [SARS-COV-2 (COVID-19) VACCINE – Australian Defence Force] (No.2) 2021
Click to access 210305-Authorisation-to-supply-administer-COVID-vaccine-No2-Aus-Defence-Force.pdf
LikeLiked by 1 person
Thanks! I will investigate the inability to publish the link later!
LikeLike
It’s not only the link… it’s also posting in general.
LikeLiked by 1 person
Can you post just a plain post now?
LikeLike
No.
I tried opening a new tab and didn’t work either.
I’m using Dissenter
LikeLiked by 1 person
Oh, there’s an idea — going to try popping on w/ Brave….
LikeLiked by 1 person
Nope. Same symptom. Put in a comment, hit post, get only one “wave” of the four bar thingie.
LikeLiked by 1 person
Keep trying – I’m working on it……
LikeLike
OK, a couple of direct questions:
1. Did you do anything that messed with the ports? As in, https is 443.
2. Having two sets of commenter cookies did seem weird. Do most people only have one? If I delete them both, will I have to be re-approved? Or are there any other unsavory consequences?
3. I can build a new computer from scratch to try to get on….but that’s an investment of time. Should I try that?
4. I just loaded a browser never before on this system, and managed to post a comment. Being brand new, it had no cookies…..should I kill the cookies in my main browser?
LikeLiked by 1 person
Keep trying to get in – I’m working on it……
LikeLike
I was able to post just now with Dissenter. Yay!
Thank you, W!
LikeLiked by 1 person
Excellent! Now – this may not be a stable solution. IF you get locked out again, same thing – let me know on UTree, or via Marica’s, etc. UTree probably fastest.
LikeLike
Ok. Thank you!
LikeLiked by 1 person
Just a reminder that if you reply to any of my comments here, I will definitely get notified!
LikeLike
Thanks, Wolf, for watching out for us, especially us radio silence lurkers.
LikeLiked by 1 person
Hi Wolfmoon, this is EllieLA. I can’t login to either site. I tried to login on WP using my username, but it says my password is incorrect.
LikeLiked by 1 person
Thanks! Hang on just a second while I investigate!
LikeLike
Here is what to do. Send me a proposed password using a comment here containing the following:
PRIVATE MESSAGE TO WOLF
with UNDERSCORES ( _ ) instead of spaces. As in P_M_T_W .
The message will show up in moderation, and I’m the only mod, except WordPress and Akismet, who won’t cheat when we’re watching.
I will then make that your PW on The Q Tree, and edit out the PW.
Your account there is good, but you have an email provider that is part of the censorship of this place.
LikeLike
PRIVATE_MESSAGE_TO_WOLF
(Password Removed)
LikeLiked by 1 person
Done!
LikeLike
Thank you! The new PW sign in worked!
LikeLiked by 1 person
Here I be, Wolf. Thanks for everything.
LikeLiked by 1 person
Hi Wolf. I am camping this week and have very little connectivity. I don’t think I am having any issues, but on my stupid phone it is hard to tell. Posting here just in case.
LikeLiked by 1 person
Have Fun!! 🥰🥰
LikeLiked by 2 people
Thanks – very helpful!
LikeLiked by 1 person
Just to say hello.
Went over to QTree for a bit, had to login here again.
LikeLiked by 1 person
So if I understand you right, you are getting locked out there after a while, but come here to log in, and then you can go there again?
LikeLike
Greetings! I guess I got here through WordPress? Lemme know!
LikeLiked by 1 person
OK – you’re here! And posting. That is the first step.
What happens when you try to post on The Q Tree now?
LikeLiked by 1 person
I tried about an hour ago…same perpetual no-go.
I would be happy to try again now, if you just changed something…I have been reading open thread 071421.
LikeLiked by 1 person
You can try it again now, and if it doesn’t work, then “security” may regard your device as a problem.
LikeLiked by 1 person
I have a question. I can log in with WP or with my username and a password.
I remember you had a random password for me way back when.
Any chance that would work.again? I just do not know what it was…
LikeLiked by 1 person
First, let me try to send you a password link.
For completeness, I logged you out of all Q Tree sessions and sent you a password link. See if you can find it in your Mmail. It may be in spam or junk or “social” or something. I did it just now. Try to reset your PW yourself.
LikeLiked by 1 person
Thanks! Have removed theqtree.com and deleted the ap icon.
Did not see a link in my in box…will check spam!
Reading from Marica’s…
LikeLike
Wolf, I checked junk in my email program on my tablet…found nothing. And for some reason, my inbox and spam folder are not visible when I log onto my internet service provider, so I will check everything out in the morning when my office is open!!!!
TY, and have a great night!
LikeLiked by 1 person
Good – we’ll work this out!
LikeLiked by 1 person
You can also send me a proposed password using “PRIVATE MESSAGE TO WOLF” using underscores instead of space. I will make that your PW.
LikeLike
PS I am still logged in under what looks like the WP header, so I may need to log out, refresh the page and log in as we did last time…
LikeLiked by 1 person
Hey Wolf, the login process doesn’t seem to be working for me a Q-Tree. The login right above the post comment box, the login under the meta category in the right column, & attempting to login on an edit post for the Q-Tree that I have open in another tab. This is the first time this problem happened to me since you’ve made the access changes…fyi
So I just liked your about page for the Q-Tree, by signing into WP in the popup, but still couldn’t login.
Also, I tried to do just a comment on the 7/14 open thread, where I’m still reading, signing in w/ name, email, & website & the comment wouldn’t post either.
Sorry for the hassles & thanks for ALL of your help & tweaking the Q-niverse!
LikeLiked by 1 person
Testing. Can”t seem to log into QTree.
LikeLiked by 1 person
Hi, Wolf. I’m having the same issue as yesterday. When I click “Login” on the QTree, it takes me to a page that says this:
The requested URL /wp-login.php?redirect_to=https%3A%2F%2Fwww.theqtree.com%2F2021%2F07%2F16%2Fdear-kag-fraud-vitiates-everything%2F was not found on this server.
LikeLiked by 1 person
I was just able to log in as usual.
LikeLiked by 1 person
I tell you what – these look like TEXTUALLY bad links.
I suspect that when you get this, if you go to the top address field and just type in the base URL of the site – https://theqtree.com – you will get in.
LikeLike
I just saw this and will try that. Thanks! (Although it just let me log in anyway. But in the future, I will try it.)
LikeLike
FWIW, today 7/21 in the morning EDT the site is heard to reach. “This site cannot be reached.” keeps coming up repeatedly. When in, likes and replies are failing or nor registering. This is unusual in my personal experience with the site.
LikeLiked by 1 person
7/21 EDT in the morning, site is hard to enter. “This site cannot be reached” comes up repeatedly. When in, likes do not register and replies fail several times before they work (time consuming). This is unusual in my personal experience on the site. FWIW
LikeLiked by 1 person
Don’t know if this is widespread, am finding it impossible to get on Qtree, conx times out every attempt.
LikeLiked by 1 person
Belay the last, just got on now
LikeLiked by 1 person
Aaaand it’s gone again, I’ll leave it while tomorrow.
What I was looking for, sometime in the last few days WM wrote about WEF and it associates, anyone know what day/article it was ?
LikeLiked by 1 person
Testing a post here prior to Operation GTD – our “grand deployment” on the new site.
I may not be here while we’re down, but I may check reports here or on the other (lockout) thread.
LikeLike
👍
LikeLiked by 1 person
For a while I was finally able to use the ‘like’ button here, but no more. I can still ‘like’ the article itself though. And I’m back to having to enter my log in for every post.
LikeLiked by 1 person
Yeah, I can’t really control too much here, or I’d do some “new Q tree” tricks. This is WP.com – much admin function is out of my hands here.
LikeLike
No problem, at least it’s functional, and that beats not functional, by a lot 👍😁
LikeLiked by 1 person
Hang on – something going on…..
LikeLike
Looks like the main site is down.
I just tried to post a couple minutes ago, and the post wouldn’t go through. When I tried to refresh the screen, it went to an “unable to connect” error page, and when I try to bring up the Qtree website from my bookmark bar I get the same error page message.
LikeLiked by 2 people
So they finally did it. Evil bastards. Something big is about to break, and we must resist.
LikeLiked by 1 person
Vox Day a couple days ago and now QTree. Last Refugew is still up, but probably not for long. And Mike just sais the symposium is under attack again. The government is going all out.
LikeLiked by 1 person
BTW, I did not get an error 522 message. I got the “contact the site manager” message, which is what happened when Vox Day got repressed.
LikeLiked by 1 person